| Customization: | Available |
|---|---|
| After-sales Service: | Online All The Time |
| Warranty: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Faster, better, simpler Operation" - that's the result of YH Waterjet technology. System highlights include:
Precision design cutting head system for easy access to replacement components and accurate control of the tool center point for high tolerance cutting.
Minimal distance between cutting head top point and bottom to eliminate potential of Abbe error (a linear deviation combined with a lever arm; the longer the lever arm, the larger the Abbe error). Abbe error must be minimized to allow precision production with YH cutting head
Fast Act on/off valve - a new high-speed, long-life, lightweight waterjet on/off valve.
Simple operation with Weihong Control Software. Simply enter the type of material, its thickness, the desired surface quality and the software calculates and precisely controls all the movements of the cutting head.
1.Work envelope
|
Machine Size |
YH-FB2030 |
|
X axis cutting area |
3000mm |
|
Y axis cutting area |
2000mm |
|
Z axis cutting area |
200-300mm |
2.60,000 psi Ultra High Pressure Technology System (94,000psi as an option)
TECHNICAL DATA
|
Max. Pressure |
420 MPa |
|
Boosting Ratio |
20:1 |
|
Max. Water Flow |
3.7L/min |
|
Max. Orifice Diameter |
0.33mm |
|
Hydraulic Reservoir Capacity |
30 gal (114 L) |
|
Attenuator Volume |
.26 gal (1L) |
|
Water Inlet Pressure |
≥0.2MPa |
|
Power of Main Motor |
37kw |
|
Power Supply Voltage |
380V/50HZ |
YH WATERJET can provide pump options
|
YH-7XSP-420mpa is available (single intensifie /50hp) |
|
YH-7xdP-420mpa double intensifier pump /60HP |
|
YH-7xdP-600mpa double intensifier pump/60HP |
|
YH-20WDP-600mpa double intensifier pump/100HP |
|
YH 420mpa Direct drive pump/30HP |
3.Abrasive cutting system
There are three main components: a metering valve,3 AXIS cutting head, and an abrasive bulk transfer.
Cutting head and orifice assembly
The Paser Shield is designed to help the operator keep a clean, efficient work area.
Dramatically reduces the spray present during normal cutting operations.
Designed primarily for abrasive waterjet cutting, but also helpful for pure waterjet cutting.
Flexible lower skirt easily passes over clamps and fixture.
The flexible skirt has been designed to allow viewing of the front of the cutting head during machine operation.
YH WATERJET can provide pump options
| Small 5 axis cutting Head ( Rotation angle 0-10 degree ) |
| Big 5 axis cutting head (Rotation angle 0-60 degree) |
Metering valve
The metering valve functions as an air isolator, an on/off valve for abrasive, a meter for theamount of abrasive that travels to the cutting head and a water diverter. It is located next to the cutting head for maximum efficiency
Continuous-Fill feed system
The abrasive delivery hopper is a fabricated steel container that holds approximately 440 lbs. (200 kg.) of abrasive. Low-pressure compressed air transfers the abrasive to the cutting system through an abrasion-resistant hose.
){kind=link}