Customization: | Available |
---|---|
Weight: | Standard |
Size: | Customized |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Waterjet cutting machine is made up of 4 main components: Cutting table, CNC controller, Auto abrasive feeder, Intensifier pump. | ||||
Cutting table | Structural style | Cantilever style | ||
Cutting area | 3000*2000*1800 | |||
Max. moving speed for X/Y-axis | 6000mm/min | |||
Max. moving speed for Z axis | 1000mm/min | |||
Load bearing | 500kg/squre meter | |||
Control accuracy | 0.01mm | |||
Cutting accuracy | 0.1mm | |||
Power supply | 220v | |||
Way of drive | AC Servo | |||
X/Y-axis structure | Aluminum structure | |||
Cutting head | Mode | 5-axis | ||
Max.orifice diameter | 0.33mm | |||
Max. nozzle diameter | 1.02mm | |||
Z-axis structure | 0.9n.m | |||
CNC Controller | 15 inch LCD montior | |||
Support DXF and NC code file | ||||
Software: Windows XP | ||||
Resistance of the shoch and electro-magntic | ||||
The key function | ||||
Forward & Backward processing function | Even pace control function | |||
Small arcs speed auto processing function | Circle processing function | |||
Partial and smooth processing modes | ||||
Abrasive Feeder | Max. inlet air pressure pressure | 0.6 Mpa | ||
Min. inlet air flow | 0.028m3/min | |||
Abrasive capacity | 225kg | |||
Features | ||||
Air valve to prevent jams and breakages | Self sealing | |||
Auto control with CNC auxiliary function | Slightly adjust the FLOW | |||
Intensifier Pump (YH-7XD) |
Maximum Pressure(PSI/BAR) | 60000/4137 | ||
Output Flow(GPM/LPM) | 1.24 | |||
Max. Nozzle Diameter(Inch) | 0.015 | |||
Recommended Nozzle Diameter (Inch) | 0.010*2 | |||
Motor | Horsepower | 60 | ||
Threephase Voltage | 190 to 440(50hz) 200 to 575(60Hz) |
|||
Motor Power (KW) | 45 | |||
Intensifier | Num. of Intensifier | 2 | ||
Proportion | 20:01 | |||
Reversing Type | Electric | |||
Oil Pump | Fluid Type | Rexroth 71C.C/Rev*1ea | ||
Capacity of tank (Gallons) | 35 | |||
Conrolling Type | Micrologix 1000 | |||
Double Pressure Transformation | Remote control by Table | |||
Operation Panel | Pressure Control | Manual knob | ||
Pump on/off PB | Standard & remote | |||
Emergencey Stop PB | Standard & remote | |||
Pump Running State | Lamp | |||
Fault Message | Lamp | |||
Hydraulic Pressure Guage | Standard | |||
Water Filter Table | Standard | |||
Stopwatch | Standard | |||
High Pressure Water Meter | No | |||
Accumulator Size | 125in³(2.2 Liter) | |||
Minimum Cooling Water Flow Rate(GPM) | 4 | |||
Water Inlet | Preposition Booster Pump | Standard, Built in unit belt driven off of special motor/pump coupling. | ||
Recommend Intake Pressure (PSI)/(GPM) | Over15/2.5 | |||
Environment Temperature | 2ºC to 49ºC | |||
Relative Humidity | Up to 95% @ 49ºC | |||
External Dimension(L*W*H,Unit:mm) | 1607*851*1484 | |||
Weight(Kg) | 1100 | |||
Notice | Only one intensifier operates at a time |