Waterjet Direct Drive Pump Part Water Board (YH011899-1)

• Certification: CE, ISO 9001:2000
• Condition: New
• Control: Automatic
• Application: Metal, Ceramic, Glass, Stone, Plastic, Waterjet Cutting Machine
• Power Source: Electric
• Style: Cantilever
• Model NO.: YH011899-1 direct drive water board
• Type: Three-Axis
• Stock: in Stock
• MOQ: One Unit
• Main Product: Water Jet Cutting Machine and Spare
• Output: 60000psi Can Be Customized
• Suit for: Direct Drive Pump
• Transport Package: Water Jet Cutting Machine Spare Part Package: Soft
• Specification: standard
• Trademark: yuanhong
• Origin: China
• Production Capacity: 100sets/Month

Product Description

Code	YH011899-1
Name	water jet SPARE PARTS water board
Material	Stainless steel
Usege	water jet cutting machine
Type	waterjet spare parts
MOQ	0ne unit
Payment	T/T100% in advance

Feature:
1.Cutting more quickly 
2.Improve the production efficiency
3.Reduce the cost
    

1.Environment friendly: With Water and sand as cutting medium, no hazardous wastes are generated and the cutting process is environmental friendly.

2.High thickness cutting: Water Jet can cut up to 170 mm Stainless Steel; 250 mm Aluminium ; 300 mm Titanium.

3.High Accuracy: Water Jet cutting machines can cut material with a positional accuracy of +/- 0.03 mm.

The indicated value refer to a measured length of 1000 m at RT 20 C +1 C according to VDI/DGQ3441.

4.Machine virtually can cut any 2D shape: Water Jet can cut any 2 dimensional profile from most of the material.

5.High edge quality: Leaves a satin smooth finish thus reduces secondary operations.

6.Minimal or no fixtures required: As the force of the water jet is vertically down, no fixtures are required for most of the material due to negligible side forces. Thin sheets may require some weight to be placed.

7.Saves raw material: When machining or roughing out expensive materials such as titanium, the scrap still has a high value. This is because they will give chunks, not chips. It is possible to get more parts from the same material because of the abrasive jets low kerf width.

8.One tool universal application: Water Jet uses one cutting head for all material or operation, no need to change tool based on material or operation. The figure shows the machining of 2D shape with single tool for multiple operations such as slots, radii, holes, and profile in 1 to 2 minute setup.