Waterjet 5 Axis CNC Marble Cutting Machine by High Pressure Waterjet
WATERJET 5 Axis CNC Marble Cutting Machine by High Pressure Waterjet
Dynamic head (XD five-axis type)--Big 5 Axis
1) Simple operation and cost savings
Shanghai Yuan Hong system operation is simple and convenient, can cut any design and create the graphics.
Will not produce dust and toxic gases, we provide comprehensive security measures.
3) To help manufacturers develop new markets
The five-axis dynamic waterjet is very suitable for the current flat cutting customers or other previously thought traditional abrasive waterjet cutting technology is not accurate , too slow or too expensive use . for the existing waterjet user to develope new markets.
Five-axis dynamic waterjet can produce higher quality work pieces at high speeds, while traditional waterjet can produce high quality work pieces at low speeds, and five-axis dynamic waterjet can produce better trimming quality than conventional
4) improve productivity
Five-axis cutting head to maximum of 45 degree angle of the cutting , cambered surface cut maximum to 61 degrees
Compared with the traditional plate cutting machine, Work piece cutting speed can increase 25% to 400%, and 25mm thick steel plate up and down the difference between the single edge not greater than 0.06mm.
Can cut a variety of different materials: such as metal, stone, glass and composite materials
Easy programming and operation, does not require special training and knowledge requirements. Cut any pattern that uses CAD files and documents.
Advantages & Versatility:
Water Jet cutting uses high pressure water to cut softer material like rubber and foam. When abrasives are added to high pressure water the resulting abrasive jets cuts harder material like steel, glass, titanium, hard rock, bullet-proof glass, and ceramics etc. The high pressure water is forced through a tiny orifice to concentrate high energy in a tiny area to cut. The water is pressurized using an intensifier pump to a pressure of 6200 bar (90,000 psi) and forced through a tiny orifice of 0.15 mm to 0.35 mm diameter creating a high velocity of beam.
Advantages of Water Jet cutting
1.Environment friendly: With Water and sand as cutting medium, no hazardous wastes are generated and the cutting process is environmental friendly.
2.High thickness cutting: Water Jet can cut up to 170 mm Stainless Steel; 250 mm Aluminium ; 300 mm Titanium.
3.High Accuracy: Water Jet cutting machines can cut material with a positional accuracy of +/- 0.03 mm.
The indicated value refer to a measured length of 1000 m at RT 20 C +1 C according to VDI/DGQ3441.
4.Machine virtually can cut any 2D shape: Water Jet can cut any 2 dimensional profile from most of the material.
5.High edge quality: Leaves a satin smooth finish thus reduces secondary operations.
6.Minimal or no fixtures required: As the force of the water jet is vertically down, no fixtures are required for most of the material due to negligible side forces. Thin sheets may require some weight to be placed.
7.Saves raw material: When machining or roughing out expensive materials such as titanium, the scrap still has a high value. This is because they will give chunks, not chips. It is possible to get more parts from the same material because of the abrasive jets low kerf width.
8.One tool universal application: Water Jet uses one cutting head for all material or operation, no need to change tool based on material or operation. The figure shows the machining of 2D shape with single tool for multiple operations such as slots, radii, holes, and profile in 1 to 2 minute setup.
Our team and service:
We've committed ourselves to the success of our customers for over 40 years. As a result, nearly 1 out of every 3 systems built is delivered to repeat customers. We are proud to provide the largest and most highly trained support team, with the experience to ensure your success.